Birds or wasps nesting in the pool cage
A torn or sagging panel is an open door: once the mesh has a gap large enough to fly through, birds and wasps treat the cage as sheltered outdoor space and nest in the corners, under the beam, or along the gutter line. Closing the gap is a rescreening job; removing an active nest is a separate task and should happen first.
Why it happens more once a panel has already failed
A cage with intact mesh keeps birds and wasps out the same way it keeps debris and no-see-ums out. Once one panel has torn, sagged, or lost mesh from the spline channel — the same failure modes covered on the sagging screen and splines popping out pages — that panel becomes the entry point, and it tends to get worse the longer it sits open, not better.
Oak canopy over cages along Country Club Road and the Markham Woods corridor puts more birds and wasps in the immediate vicinity to begin with, which is one more reason canopy lots see this more often than open interior lots.
What to do about it
Deal with an active nest on its own terms first, especially wasps. Once the cage is clear, the fix is the same as any other torn or sagging panel — see rescreen vs. repair to work out whether it is a one-panel job or a sign the rest of the mesh needs attention too.
Questions people actually ask
Will fixing the screen remove birds or wasps already inside?
No — rescreening closes the opening, it does not remove anything already nesting inside the cage. An active nest should be dealt with on its own before or separately from the repair, particularly for wasps.
Send a photo of the opening
That is usually enough to tell whether it is a single-panel fix or something bigger.
Phone: (689) 666-9380 · Email: quotes@lakemaryrescreening.com